Thanks. And no VLANs as this is for my house. And with 3 of the 4 APs wired to the same switch, that eliminates multiple hops.
Original Message:
Sent: 12-17-2020 10:35 AM
From: Stephane Laroche
Subject: New user, AP22 Question - backhaul
Hi Larry, you can certainly have many APs wired on the same switch. The only limitation, which is inherent to the technology, is to avoid multiple hops over the air when meshing APs. When installing an AP over mesh, it is good practice to make sure it will be able to establish a good link with an AP that is wired.
One more thing to keep in mind: you didn't say if you were using VLANs on your switch. I am guessing not, but if you are then you need to make sure your APs are all connected to the same management VLAN.
------------------------------
Stephane
------------------------------
Original Message:
Sent: 12-17-2020 06:36 AM
From: larry schwenk
Subject: New user, AP22 Question - backhaul
Thanks. But, in my situation if I install 4 AP22s, can three of them be physically wired to the switch, and one not wired?
Everything I've seen so far only shows the first one wired and the rest wireless for backhaul. My concern is that they only talk to each other wirelessly.
------------------------------
larry schwenk
Original Message:
Sent: 12-16-2020 05:01 PM
From: Jaap Vaak
Subject: New user, AP22 Question - backhaul
Yes, you can mesh the AP22. Specs are clear on that.
There is no Wi-Fi6 outdoor accesspoint available atm.
I can't solid advice you on putting a AP22 in a shed, but would think it works.
------------------------------
Jaap Vaak