Instant On - Wired

Does anyone know why the result of cable tests for the AP22D end device is always: " Impedance mismatch in cable." After changing ...

Hi team, I have two questions about QoS setting of ION SW 1 When converting to CoS values, is there some mapping table ...

Alguma sugestão de treinamento de configuração de switch HPe em português? ------------------------------ Ederson Wermeier ...

Hi All, I've created a really simple ACL. On a Instant On 1930 JL686A ip access-list extended test permit ip any 10.183.2.31 ...

I am using about 20 1960s with firmware 2.9.1, and after 255 days of operation the CPU display on the local console becomes 100%. ...

I have a JL683A as local, managed switch connected to an AP22 (POE). The AP22 went offline. The front of the JL683A has a blinking ...

Hello and good Day! I want to ask here since the manuals are not very clear and could not find information on the web, most likely ...

Hi Paul, When I upgraded my two instant on switches, I jumped straight to the latest version and was ok. Before ...

The current software version of Aruba Instant On 1930 switch is running on version 2.6.0. How can I upgrade to the least version ...

Hello, We are currently configuring a Aruba Instant On 1930 switch with port based authentication. The switch is connected ...