Instant On - Wired

 View Only

  • 1.  Aruba 1930 error mode on cisco port

    Posted 09-16-2022 11:57 AM
    hi everyone,

    aruba 1930 switch is connected directly on cisco and the link keeps going up and down dropping packets due to this instability.

    what configs should be applied on each to stabilize the situation?

    thanks

    ------------------------------
    sam Anderson
    ------------------------------


  • 2.  RE: Aruba 1930 error mode on cisco port

    Posted 10-06-2022 10:47 PM
    Hi, 

    I got the same problem.. It seems like I can't find any configuration that stabilize the situation.

    ------------------------------
    Arnaud TUIHANI
    ------------------------------



  • 3.  RE: Aruba 1930 error mode on cisco port

    Posted 10-08-2022 07:13 AM
    I've never used a 1930, but using other Aruba (non InstantOn) switches  with Cisco switches, UDLD has been troublesome.

    Switch off UDLD on the Cisco uplink using the no udld port command.

    ------------------------------
    Andy K
    ------------------------------

    Original Message


  • 4.  RE: Aruba 1930 error mode on cisco port

    Posted 10-09-2022 05:05 PM
    UDLD is disabled by default.

    I'm still trying to figure it out..

    ------------------------------
    Arnaud TUIHANI
    ------------------------------

    Original Message


  • 5.  RE: Aruba 1930 error mode on cisco port

    Posted 10-11-2022 01:04 PM
    Hey Arnaud,

    Please contact our support team for assistance. https://www.arubainstanton.com/contact-support/

    ------------------------------
    Aruba Instant On Communications
    ------------------------------

    Original Message


Related Content