Instant On - Wired

Hello,
I am trying to create Vlan Aruba 1930 switch for Aruba 615AP, which has options to create several Wifi Vlan (example User-Vlan, Guest-Vlan ect..) Need to create 2 Vlan from one switch port.
I created a Vlan for the other devices, everything is ok, but I can't for the Aruba AP, and I'm also trying, without results. Maybe this switch does not support 2 untagged Vlan from one port? Maybe I'm doing something wrong. Will you help with advice?
Thank you!

Hi Alvis,

Perhaps try, untagged VLAN 1 and also add VLAN 20 and VLAN 30 as "tagged" VLANs to the port that will connect to the AP-615.

This thread mentions more about trunk ports on the AP:

https://community.arubanetworks.com/discussion/aps-connected-to-trunk-ports

Hello,
I am trying to create Vlan Aruba 1930 switch for Aruba 615AP, which has options to create several Wifi Vlan (example User-Vlan, Guest-Vlan ect..) Need to create 2 Vlan from one switch port.
I created a Vlan for the other devices, everything is ok, but I can't for the Aruba AP, and I'm also trying, without results. Maybe this switch does not support 2 untagged Vlan from one port? Maybe I'm doing something wrong. Will you help with advice?
Thank you!

tried both with and without untagged 1...this option doesn't work. Switch port hangs..I tried all options, it is not possible to start 2vlan from one port. Strange... Maybe someone knows if this switch can support the option - from one port to 2 untagged Vlan?

Hi Alvis,

Perhaps try, untagged VLAN 1 and also add VLAN 20 and VLAN 30 as "tagged" VLANs to the port that will connect to the AP-615.

This thread mentions more about trunk ports on the AP:

https://community.arubanetworks.com/discussion/aps-connected-to-trunk-ports

Hello,
I am trying to create Vlan Aruba 1930 switch for Aruba 615AP, which has options to create several Wifi Vlan (example User-Vlan, Guest-Vlan ect..) Need to create 2 Vlan from one switch port.
I created a Vlan for the other devices, everything is ok, but I can't for the Aruba AP, and I'm also trying, without results. Maybe this switch does not support 2 untagged Vlan from one port? Maybe I'm doing something wrong. Will you help with advice?
Thank you!

Hi,

I googled a bit and could not see how to set multiple untagged VLANs, but did find:

https://community.arubanetworks.com/discussion/create-multiple-vlan-for-ap .

tried both with and without untagged 1...this option doesn't work. Switch port hangs..I tried all options, it is not possible to start 2vlan from one port. Strange... Maybe someone knows if this switch can support the option - from one port to 2 untagged Vlan?

Hi Alvis,

Perhaps try, untagged VLAN 1 and also add VLAN 20 and VLAN 30 as "tagged" VLANs to the port that will connect to the AP-615.

This thread mentions more about trunk ports on the AP:

https://community.arubanetworks.com/discussion/aps-connected-to-trunk-ports

Hello,
I am trying to create Vlan Aruba 1930 switch for Aruba 615AP, which has options to create several Wifi Vlan (example User-Vlan, Guest-Vlan ect..) Need to create 2 Vlan from one switch port.
I created a Vlan for the other devices, everything is ok, but I can't for the Aruba AP, and I'm also trying, without results. Maybe this switch does not support 2 untagged Vlan from one port? Maybe I'm doing something wrong. Will you help with advice?
Thank you!