Hi-expert
I am having trouble because there is no description of how to assign an IP address when authenticating using 802.1x.
1.Local Web UI scenario
In this case, the NAS (AP/Sitch) receives the Radius Server's successful authentication and the attribute VLAN name and assigns the PC to the specified VLAN. After, PC sends a DHCP request, and the NAS forwards the PC request using the configured DHCP relay IP helper address.
This scenario works , but it case cannot use Aruba Instant On Cloud.
2.Aruba Instant On 2.9.0 User Guide - Mobile App Version
This only describes how to configure the Radius Server on the NAS, but does not describe how the PC obtains the IP address.
As per this manual, if we can change the PC from Default VLAN to Guest/Employee VLAN and connect, Attribute on the Radius Server side is required.
a)Obtain DHCP information from Radius and the PC obtains the address or
b)Return the address to the PC using a procedure similar to assigning an IP address to the PC via VPN
Without this information, I cannot use 802.1x as described in the Mobile App Version manual, so please let me know.
------------------------------
Kazuhiro Sunada
------------------------------