Instant On - Wired

Hi

I have a problem where I would to with mac auth change the port on my 1930 switch to have untagged and tagged vlans.

So that when I connect a AP to the port it will dynamic with clearpass get the right vlans

I have it working with one VLAN, either tagged or untagged both working 

This is working as it should.

Changing the Tunnel-Private-Group-Id to T:vlanid is working as a tagged in the 1930. having it U:vlanid;T;vlanid the switch is only seeing the first part.

Having it different lines like this

Its using the last line, In this instance its tagged the vlan on the port.

Is this possible on a 1930? or does the switch not support dynamic multi vlans on same port? 

have you made any progress here? I'm also struggling with 802.1x and MAC-Auth between InstantOn and CPPM.

Best Regards

Wolfgang

Hi

I have a problem where I would to with mac auth change the port on my 1930 switch to have untagged and tagged vlans.

So that when I connect a AP to the port it will dynamic with clearpass get the right vlans

I have it working with one VLAN, either tagged or untagged both working 

This is working as it should.

Changing the Tunnel-Private-Group-Id to T:vlanid is working as a tagged in the 1930. having it U:vlanid;T;vlanid the switch is only seeing the first part.

Having it different lines like this

Its using the last line, In this instance its tagged the vlan on the port.

Is this possible on a 1930? or does the switch not support dynamic multi vlans on same port?