Community How To

Hi Folks
I work with cisco switches connecting in AP Aruba 228 and 225 thro Instant system. Works fine
Due a project of security cameras, I need to conect cisco switch with new Aruba instant on 1930 swicth 24ports. In this aruba I am trying to connect an AP 228. However even configre vlans, trunk the AP doesn´t work
So, cisco switch can talk with Aruba by ping, but I can´t configure to pass the Vlans across 1930 for AP get IPs.
Could you help me how can I do this configuration? 
Let me know if you need more details
Thank you in advance
Wilson

------------------------------
WILSON ROSA
------------------------------

Looks like you're mixing HP Enterprise products (AP-228), aka "Instant", with Aruba "Instant On" products (1930 switch).
These are 2 totally different product lines (Enterprise vs. SMB/Prosumer) and cannot be managed together.
On just IP-level they can of course talk to each other, but management-wise, totally different things.

Original Message:
Sent: 02-18-2025 12:08 PM
From: Wired Intelligent Edge
Subject: Aruba 1930 vs Cisco

Hi Folks
I work with cisco switches connecting in AP Aruba 228 and 225 thro Instant system. Works fine
Due a project of security cameras, I need to conect cisco switch with new Aruba instant on 1930 swicth 24ports. In this aruba I am trying to connect an AP 228. However even configre vlans, trunk the AP doesn´t work
So, cisco switch can talk with Aruba by ping, but I can´t configure to pass the Vlans across 1930 for AP get IPs.
Could you help me how can I do this configuration? 
Let me know if you need more details
Thank you in advance
Wilson

------------------------------
WILSON ROSA
------------------------------

So, you are saying me that AP228 and Aruba switch instant on 1930 won't work, is it correct?

------------------------------
WILSON ROSA

Original Message:
Sent: 02-19-2025 09:14 AM
From: TeWe
Subject: Aruba 1930 vs Cisco

Looks like you're mixing HP Enterprise products (AP-228), aka "Instant", with Aruba "Instant On" products (1930 switch).
These are 2 totally different product lines (Enterprise vs. SMB/Prosumer) and cannot be managed together.
On just IP-level they can of course talk to each other, but management-wise, totally different things.

Original Message:
Sent: 02-18-2025 12:08 PM
From: Wired Intelligent Edge
Subject: Aruba 1930 vs Cisco

Hi Folks
I work with cisco switches connecting in AP Aruba 228 and 225 thro Instant system. Works fine
Due a project of security cameras, I need to conect cisco switch with new Aruba instant on 1930 swicth 24ports. In this aruba I am trying to connect an AP 228. However even configre vlans, trunk the AP doesn´t work
So, cisco switch can talk with Aruba by ping, but I can´t configure to pass the Vlans across 1930 for AP get IPs.
Could you help me how can I do this configuration? 
Let me know if you need more details
Thank you in advance
Wilson

------------------------------
WILSON ROSA
------------------------------

Of course they will "work" as long as you configure IP's/Subnets correctly.
What I'm saying is, you will never have them in ONE Management UI/Dashboard because they're different product trains.
Each of them has it's own Management Portal/Controller which makes it unnecessarily complicated.

Why not swap AP-228 against AP-27?
Then you have an enterprise-grade, state-of-the-art Outdoor AP which can be managed in the same portal as your 1930 switch.

https://instant-on.hpe.com/de/produkte/access-points/access-point-27/

Original Message:
Sent: 02-19-2025 10:51 AM
From: Wired Intelligent Edge
Subject: Aruba 1930 vs Cisco

So, you are saying me that AP228 and Aruba switch instant on 1930 won't work, is it correct?

------------------------------
WILSON ROSA

Original Message:
Sent: 02-19-2025 09:14 AM
From: TeWe
Subject: Aruba 1930 vs Cisco

Looks like you're mixing HP Enterprise products (AP-228), aka "Instant", with Aruba "Instant On" products (1930 switch).
These are 2 totally different product lines (Enterprise vs. SMB/Prosumer) and cannot be managed together.
On just IP-level they can of course talk to each other, but management-wise, totally different things.

Original Message:
Sent: 02-18-2025 12:08 PM
From: Wired Intelligent Edge
Subject: Aruba 1930 vs Cisco

Hi Folks
I work with cisco switches connecting in AP Aruba 228 and 225 thro Instant system. Works fine
Due a project of security cameras, I need to conect cisco switch with new Aruba instant on 1930 swicth 24ports. In this aruba I am trying to connect an AP 228. However even configre vlans, trunk the AP doesn´t work
So, cisco switch can talk with Aruba by ping, but I can´t configure to pass the Vlans across 1930 for AP get IPs.
Could you help me how can I do this configuration? 
Let me know if you need more details
Thank you in advance
Wilson

------------------------------
WILSON ROSA
------------------------------

Understood, however,  in my company we have only cisco switches and due a new security cams project they brought Aruba1930.

So, I have only AP228 and 225 a long time ago and working with cisco switches. As I don´t know how I can configure ARUBA with AP228 I will replace Aruba

Than you

Of course they will "work" as long as you configure IP's/Subnets correctly.
What I'm saying is, you will never have them in ONE Management UI/Dashboard because they're different product trains.
Each of them has it's own Management Portal/Controller which makes it unnecessarily complicated.

Why not swap AP-228 against AP-27?
Then you have an enterprise-grade, state-of-the-art Outdoor AP which can be managed in the same portal as your 1930 switch.

https://instant-on.hpe.com/de/produkte/access-points/access-point-27/

Original Message:
Sent: 02-19-2025 10:51 AM
From: Wired Intelligent Edge
Subject: Aruba 1930 vs Cisco

So, you are saying me that AP228 and Aruba switch instant on 1930 won't work, is it correct?

------------------------------
WILSON ROSA

Original Message:
Sent: 02-19-2025 09:14 AM
From: TeWe
Subject: Aruba 1930 vs Cisco

Looks like you're mixing HP Enterprise products (AP-228), aka "Instant", with Aruba "Instant On" products (1930 switch).
These are 2 totally different product lines (Enterprise vs. SMB/Prosumer) and cannot be managed together.
On just IP-level they can of course talk to each other, but management-wise, totally different things.

Original Message:
Sent: 02-18-2025 12:08 PM
From: Wired Intelligent Edge
Subject: Aruba 1930 vs Cisco

Hi Folks
I work with cisco switches connecting in AP Aruba 228 and 225 thro Instant system. Works fine
Due a project of security cameras, I need to conect cisco switch with new Aruba instant on 1930 swicth 24ports. In this aruba I am trying to connect an AP 228. However even configre vlans, trunk the AP doesn´t work
So, cisco switch can talk with Aruba by ping, but I can´t configure to pass the Vlans across 1930 for AP get IPs.
Could you help me how can I do this configuration? 
Let me know if you need more details
Thank you in advance
Wilson

------------------------------
WILSON ROSA
------------------------------