
I am beginer and trying aruba products and currently I have a project connecting two buildings with radio but they are using multiple VLANs also. there are 6 VLANs with the following designations and VLAN IDs:
VLAN 1 Default Vlan
VLAN 20 MGMT
VLAN 21 VIP
VLAN 22 Guest
VLAN 28 Student
VLAN 32 Teacher
there is a switch located in A (SD) which already has a configuration 6 vlans ID above. they are using a switch aruba 2930 series on side A. there are the port which already connected between side A and side B, and already configured using vlan 20 access mode.
The side B are using the Aruba 6000 series and AP11 for the AP.
currenctly the switch port on side B is in access mode and AP11 can be detected on the Aruba Instant On App.
is there a way to pass to 6 vlans so they can be used in AP11 with different SSIDs?
------------------------------
Muhammad Reza Saifulloh Mubarok
------------------------------