Instant On - Wireless

 View Only

  • 1.  AP22 uplink speed 100Mbps

    Posted 12-07-2023 02:39 AM

    Hello Member

    I have AP11D and AP22 for wireless access point.

    AP22 connected to AP11D via UTP CAT6 on Port E3 of AP11D


    -AP11D  on Port E3 show speed 1Gpbs to AP22

    -AP22 on up-link port show speed 100Mbps

    How can I check and root cause problem ?



    ------------------------------
    Tho kan
    ------------------------------


  • 2.  RE: AP22 uplink speed 100Mbps

    Posted 12-07-2023 03:38 AM

    I have the exact same constellation as you described. For me it's working fine. So both ports on both device show 1 Gbps.

    I have configured every port as "automatic" perhaps this has an influence about auto sense.



    ------------------------------
    Ryder Hook
    ------------------------------



  • 3.  RE: AP22 uplink speed 100Mbps

    Posted 12-07-2023 04:17 AM

    Do you use UTP CAT6 ?



    ------------------------------
    Tho kan
    ------------------------------

    Original Message


  • 4.  RE: AP22 uplink speed 100Mbps

    Posted 12-07-2023 05:01 AM

    I'm not sure. There is no corresponding note on the cable. On the other hand, it says that the cable is certified for 1 Gbps.



    ------------------------------
    Ryder Hook
    ------------------------------

    Original Message


  • 5.  RE: AP22 uplink speed 100Mbps

    Posted 12-19-2023 12:14 PM

    Try another cable.



    ------------------------------
    Jim
    ------------------------------

    Original Message


  • 6.  RE: AP22 uplink speed 100Mbps

    Posted 12-19-2023 12:16 PM

    I've seen this once in my network. I replaced the cable. It was a layer 1 problem. 



    ------------------------------
    Sandmouse Sandb0x
    ------------------------------



Related Content