Try another cable.
Original Message:
Sent: 12-07-2023 05:01 AM
From: RH74
Subject: AP22 uplink speed 100Mbps
I'm not sure. There is no corresponding note on the cable. On the other hand, it says that the cable is certified for 1 Gbps.
------------------------------
Ryder Hook
Original Message:
Sent: 12-07-2023 04:17 AM
From: Tho kan
Subject: AP22 uplink speed 100Mbps
Do you use UTP CAT6 ?
------------------------------
Tho kan
Original Message:
Sent: 12-07-2023 03:37 AM
From: RH74
Subject: AP22 uplink speed 100Mbps
I have the exact same constellation as you described. For me it's working fine. So both ports on both device show 1 Gbps.
I have configured every port as "automatic" perhaps this has an influence about auto sense.
------------------------------
Ryder Hook
Original Message:
Sent: 12-07-2023 02:39 AM
From: Tho kan
Subject: AP22 uplink speed 100Mbps
Hello Member
I have AP11D and AP22 for wireless access point.
AP22 connected to AP11D via UTP CAT6 on Port E3 of AP11D
-AP11D on Port E3 show speed 1Gpbs to AP22
-AP22 on up-link port show speed 100Mbps
How can I check and root cause problem ?
------------------------------
Tho kan
------------------------------