Instant On - Wired

The current software version of Aruba Instant On 1930 switch is running on version 2.6.0. How can I upgrade to the least version 3.1.0 or 3.2.0? Could I directly upgrade from 2.6.0 to 3.1.0 or there are any upgrade path needs to be followed?

Hi Paul,

When I upgraded my two instant on switches, I jumped straight to the latest version and was ok.

Before upgrading, I'd recommend saving your current config and then making backups of your "startup config" , and also your current "active firmware image". ( See attached screenshots).

After that, you can use the upload option, to update, the backup firmware image ( see attached screenshots).

The switch reboots in to the newly uploaded image.

If needed, you can revert back to your current level by choosing, the dual image configuration option & rebooting.

Good luck 👍🏻