I have already tried vacuuming them one at a time, but the problem is not resolved.
I have also redone the copies and reset the switch.
------------------------------
Giuseppe Esposito
------------------------------
Original Message:
Sent: 01-23-2024 09:25 AM
From: SteinarGrande
Subject: Backup and Restore Aruba istanton 1930 ver 2.9.0
Somewhat same experience,
unless you have thousands to setup,
you wil be better off, one by one...
Med Vennlig Hilsen
Steinar Grande
Seniorkonsulent IKT Seksjonen
Arkitektur, Drift & Sikkerhet
Mob +47 94 97 93 17 / Skype: +47 22 45 18 08
VID Vitenskapelige Høgskole
P.b. 184 Vinderen, NO-0319 Oslo
www.vid.no
Original Message:
Sent: 1/20/2024 5:52:00 AM
From: Peppeespo86
Subject: Backup and Restore Aruba istanton 1930 ver 2.9.0
I would like to ask for help and if it has happened to you as well.
I have to do configuration of several aruba switches instanton 1930.
I configured the first one and did the backup (Manteinance-->Backup & update Files-->Backup-->Running Configuration-->Http-->Start File Transfer) then I connected on the second switch (not configuring anything besides the initial account) and did the update (Backup and Update Files-->Update-->Startup Configuration-->Http--> Start file transfer) after the confirmation message, Reset-->Reboot-->Save configuration and Reboot.
After reboot, the switch does not have the updated configuration.
I try with Mozilla Firefox and Microsoft Edge
------------------------------
Giuseppe Esposito
------------------------------