Hallo Zusammenđź‘‹,
Ziel:
Ich habe einen Aruba Instant On 1930 Switch. Und möchte gerne eine 802.X Authentifizierung mit Clearpass (CPPM) machen.
Problem Beschreibung:
Allerdings bekomme keine, nur Unregelmäßig (3 von 10 Versuchen klappt es) oder nur sehr verspätet (ca. 10min nach Anschluss des Gerätes / Reauthentifizierung) ein feedback im Accces Tracker vom CPPM.
Konfiguration:
RADIUS Configuration:
802.1X Authentication Mode = ON
802.1X Authentication Mode = ON
Max Nr. of Retransmits: 3
Timeout Duration: 3
Radius Management Authentication = ON
RADIUS Server Configuration: Der CPPM Server
Port Access Control
Szenario - 1 (Keine Antwort beim CPPM bzw. Unregelmäßig)
INT-1 (Benutzt fĂĽr die Port Authentifizierung):
Control Mode = Force UnAuthorized
Quiet Period = 60 Seconds
Transmit Period = 30 Seconds
VLAN = OFF
Guest = OFF
... (Standard)
MAC Authentication = OFF
Szenario - 2 (Auto Antwort erst nach ca 10 MIn+ und Unregelmäßig)
INT-1 (Benutzt fĂĽr die Port Authentifizierung):
Control Mode = Auto
Quiet Period = 60 Seconds
Transmit Period = 30 Seconds
VLAN = OFF
Guest = OFF
... (Standard)
MAC Authentication = ON
Szenario - 3 (Auto Keine Antwort)
INT-1 (Benutzt fĂĽr die Port Authentifizierung):
Control Mode = Auto
Quiet Period = 60 Seconds
Transmit Period = 30 Seconds
VLAN = OFF
Guest = OFF
... (Standard)
MAC Authentication = OFF
Ich hoffe die Informationen reichen. Und das Ihr mir helfen könnt.
Mit freundlichen GrĂĽĂźen
------------------------------
Leonard Mis
------------------------------