Instant On - Wired

 View Only
Back to discussions
Expand all | Collapse all

Problem with third party SFP module after upgrade from 2.6.0 to 3.0.0 on 1930

  • 1.  Problem with third party SFP module after upgrade from 2.6.0 to 3.0.0 on 1930

    Posted 08-30-2024 11:29 AM

    Hello

    I am having a "weird" issue when using the J4858D from fs.com in 1930 24G Class4 PoE (JL683B) switches

    on fw 2.6.0 works perfectly stable no issues since forever

    on fw 3.0.0 the transceiver is suspended for excessive link flap 

    my luck is that I run the test in a lab before deploying in production

    any ideas?

    thanks



    ------------------------------
    Catalin
    ------------------------------


  • 2.  RE: Problem with third party SFP module after upgrade from 2.6.0 to 3.0.0 on 1930

    Posted 08-31-2024 09:21 AM
    Edited by travatine 08-31-2024 09:27 AM
      |   view attached

    Hi Catalin,

    I'd suggest taking a backup of your current switch configuration ( if you are using local management).

    Then trying a factory reset , by following these steps from the 1930 user guide

    If the SFP still does not work after the factory reset, I guess your options are to open a case with HPe support, or alternatively try "temporarily" reverting back to the 2.6 version of the firmware & verify the SFPs still work as they did before.
    From what I could find, the 1930 supports these SFPs 
    Good luck,
    Travis.



    ------------------------------
    Travis Thorne
    ------------------------------

    Attachment(s)

    pdf
    InstantOn_1930_IGSG.pdf   1.43 MB 1 version


Related Content